How to Calibrate iPhone Screen? (Best 4 Ways)

Today, I will be taking the four ways by which the users of the smartphone can Calibrate iPhone screen. So, scroll down the blog and plunge into the four different ways.

Using our professional instruction for calibrating iPhone touch screen mobile phones, you can easily repair or calibrate iPhone screen. Now, stop worrying about finding the right information on how to calibrate an iPhone screen.

There are numerous approaches and ‘simple’ methods for troubleshooting the problem and calibrating the iPhone touch screen. This post has put up a useful guide to assist you with iPhone screen calibration.

4 Ways to Calibrate iPhone Screen


Below I have mentioned four know-how to calibrate the iPhone touch screens. So, read each of them to give your own iPhone touch screen calibration.

Way 1: Calibrating the Brightness Level of your iPhone’s screen.

If your iPhone Auto-Brightness Level sensor is not working at regular intervals, there is a possibility that your iPhone is reacting to the changes of the light contraction incorrectly.

This is so because whenever the Auto-Brightness adjusts the brightness level it is usually based on the setting that was previously set or turned on. However, to calibrate the Auto-Brightness sensor, you need to plunge into the given mentioned steps:

  1. In the first step, you need to go to the Settings application and look for the Accessibility menu. 
  2. In the next step, you need to turn off the Auto-Brightness slider once you pick up the Display & Text Size.
  3. After that to make the screen look darker than previously set, you need to move the slider to the dark or dim-lit option and manually turn the Brightness level down.
  4. At last, you need to test the brightness level to check whether the brightness level that you have set works per your requirement or notion the room that has normal illumination. Also, for this, you can conversely turn on the Auto-Brightness toggle switch.

Way 2: Calibrate the Motion Sensors and Compass on your iPhone. 

Close contact with a magnet or other external environmental elements can impact the motion sensors on your iPhone.

So, if you accidentally miscalibrated the settings of the motion sensors or the screen sensor of your iPhone, you will be at once taken to the compass application for re-calibrating the way you desire your iPhone motion sensors. 

Conversely, all other motion sensors of the phone including whether it be magnetometer, or accelerometer every other sensor can be easily calibrated using the compass application of the iPhone screen. Here’s a simple tutorial on how to use the compass app to calibrate the motion sensors on your iPhone.

  1. In the first step, you need to find the Compass application visible on the iPhone and thereby go to the page and open it. 
  2. Now, in the next step, you need to tilt the wither upside or downside as directed by the on-screen prompt guideless, and then you simply need to roll the red ball visible around the circle or the zone. 
  3. After that, you need to continue with the tilting process for some more time until the compass appears on the displayed screen in a red ball like-color. 
  4. Finally, when the compass shows on the screen, it means your iPhone’s motion sensors have been calibrated.

Way 3: Calibrate the Sensitivity of the iPhone Screen.

Apple currently does not give a direct option to alter the sensitivity of your iPhone’s touch screen. If your iPhone is not working properly or is giving you a sluggish experience, you can try the solutions listed below to see if you can resolve the problem.

  1. In the first step, clean and remove any debris from the display of the phone. Because the screen is composed of glass, it might accumulate grease over time, which can interfere with the screen’s response or sensitivity. Despite, the problem persisting, you might need to log out and restart the device. 
  2. At last, if you’ve used tempered glass or another type of screen protector, you should remove it because it could be the cause of your iPhone’s lack of touch sensitivity.

Way 4: Calibrating the Batter Saver of the iPhone.

Sometimes, you might have noticed that the iPhone starts giving some erroneous percentages results. The phone battery will lurk up a notification that the battery percentage is draining but on the other side, it will last or extra hour.

It will also show a full battery percentage and at the same time it shuts down completely. So, it becomes quite necessary to know how you can easily calibrate your iPhone battery saver on iPhone:

  1. At first, to address the phone monitoring of the battery percentage, you need to draft the report of the remaining battery percentage and then you need to start calibrating the iPhone battery on the device.
  2. Next, you need to plug in the charge to charge at a full battery percentage. Then, you need to use up all the battery percentage until it dies out.
  3. After that, conversely for draining the battery percentage,e you can easily let your phone unplug and discharge it overnight.
  4. Then, in the next step, you need to plug your phone into the charger for some time may be for a few hours to bring their battery percentage up to 100% capacity.
  5. After that, you need to restart and power on the slider to perform a soft reset also called the warm reset. Here, it is suggested to go down to the tutorial blog on your site to check out how to perform the reset as the process largely depends on the model to model.



1. Why won’t my iPhone’s screen respond to my touch?

Ans. At first, you need to restart the iPhone or the iPad. In the next step, you need to check it out to see if the visible screen is clear or not. In other words, you should keep no checking the debris, wetness level, or the intensity of the phone regularly. 

Also, it is advisable to remove any other inserted accessories to the phone like a USB cable. Perhaps, you can also try a different outlet, or charger if your screen works after removing an attachment.

2. Why is it that my iPhone is pressing buttons all by itself?

Ans. The presence of external components on the screen is one of the most common causes of your iPhone clicking on its own. If external stuff (such as dust or water) gets on the screen, the odds of the screen malfunctioning are great. So, it becomes vital to keep on cleaning the screen regularly. 

3. Is tempered glass effective at reducing touch sensitivity?

Ans. Tempered glass is built in such a way that it does not affect the phone’s touch sensitivity. It’s usually a good idea to put tempered glass over the phone’s screen because it protects it from significant scratches.

Related Posts:

Final Words


We hope you enjoyed our how to calibrate iPhone screen troubleshooting guide. It is hereby requested to kindly forward it to the ones who need it may be your friends or any relatives all around. Also, check out our other articles for additional Apple hints and tips.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *